DUSTLOK® Dual-Ply Media With Spor-Ax®
MERV 8 – The Only True High Performance Media
Distinct Dual Density provides maximum dust
loading. The course open structure of the white,
air entering layer is designed for depth loading.
The orange, dense downstream layer prevents finer dirt particles from passing through the media.
Unique Dustlok Adhesive uniformly coats the fibers in the downstream layer during the formation of the media. Dustlok is an integral part of total media – not a post application.
Dustlok Will Not Dry Out Or Migrate due to the non-volatile chemical composition of ties adhesive formulation.
Dustlok Renews Its Effectiveness by absorbing dust particles into the adhesive, thus trapping them onto the surface of individual fibers.
Operating Temperature Up To 200° F with no adverse effect in performance.
Sport-Ax Antimicrobial is a biocide that effectively controls growth of mold, mildew, algae and fungi on filters. Fiberbond filters with Spor-Ax do not support microbial growth. Spor-Ax will not off gas, migrate or leach into the air stream.
Dual-Ply Dustlok Performance Independent laboratory testing using ASHRAE Standard 52.2 (Method of Testing General Ventilation Air Cleaning Devised for Removal Efficiency by Particle Size) classified one inch Dustlok as MERV 8. Actual test performance curves show efficiencies at various resistance points.
DUSTLOK® and SPOR-AX® are registered trademarks of Fiberbond Corp.
All media manufactured and fabricated in USA by Fiberbond Corp.